Aruba 550 Series Wireless Access Points

Aruba Aruba

New

The Aruba 550 Series with 802.11ax (Wi-Fi 6), combined with Aruba intelligent software innovations are designed to deliver high performance connectivity for extreme high-density deployments of mobile and IoT.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The Aruba 550 Series with 802.11ax (Wi-Fi 6), combined with Aruba intelligent software innovations are designed to deliver high performance connectivity for extreme high-density deployments of mobile and IoT. The 550 Series is designed to simultaneously serve multiple clients and traffic types with dual radio (8x8 + 4x4 MIMO) and optional tri-radio mode, boosting overall network performance by up to 4X versus 802.11ac APs. In addition to the benefits that 802.11ax delivers, the 550 Series provide differentiated capabilities which include AI-powered Wi-Fi RF optimization, always-on connectivity, WPA3 certified security, and unified wired and wireless policy with Dynamic Segmentation. Green AP mode offers AI-powered energy savings of up to 70%.

  • 6 Gbps of maximum throughput and up to 1024 clients per radio
  • WPA3 and Enhanced Open security
  • Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices
  • OFDMA and MU-MIMO for enhanced multi-user efficiency
  • IoT-ready Bluetooth 5, NFC, and Zigbee suppor
  • Optional tri-radio mode with two 5GHz and one 2.4Ghz radio (4x4 MIMO)
Hardware variants AP-555: Internal antenna models
Mounting Details A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the Aruba mount kits (sold separately); see the ordering Information section below for details.
Environmental Specifications
  • Operating conditions
    • Temperature: 0C to +50C / +32F to +122F
    • Humidity: 5% to 93% non-condensing
    • AP is plenum rated for use in air-handling spaces
    • ETS 300 019 class 3.2 environments
  • Storage and transportation conditions
    • Temperature: -40C to +70C / -40F to +158F
    • Humidity: 5% to 93% non-condensing
    • ETS 300 019 classes 1.2 and 2.3 environments
Mechanical Specifications
  • Dimensions/weight (AP-555; unit, excluding mount bracket):
    • 260mm (W) x 260mm (D) x 58mm (H) / 10.2" (W) x 10.2" (D) x 2.3" (H)
    • 1,570g / 55.4oz
  • Dimensions/weight (AP-555; shipping):
    • 320mm (W) x 303mm (D) x 108mm (H) / 12.6" (W) x 11.9" (D) x 4.3" (H)
    • 2,230g / 78.7oz
Power Sources and Power Consumption
  • The AP supports direct DC power and Power over Ethernet (POE; on port E0 and/or E1)
  • When POE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources
  • When both DC and POE power sources are available, DC power takes priority over POE
  • Power sources are sold separately; see the ordering Information section below for details
  • When powered by DC, 802.3bt (class 5) POE or 2x 802.3at (class 4) POE, the AP will operate without restrictions.
  • When powered by 1x 802.3at (class 4) POE and with the IPM feature disabled, the AP will disable the USB port, disable the other Ethernet port, operate the 5GHz radio in 4x4 mode, and disable tri-radio operation
  • In the same configuration but with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions and order can be programmed.
  • Operating the AP with an 802.3af (class 3 or lower) POE source is not supported.
  • Maximum (worst-case) power consumption (dual-radio operation):
    • DC powered: 32.6W
    • POE powered (802.3bt or dual 802.3at): 38.2W
    • POE powered (802.3at, IPM disabled): 25.1W
    • All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 6.0W (POE powered) or 5.4W (DC powered).
  • Maximum (worst-case) power consumption in idle mode (dual-radio operation): 15.0W (POE) or 15.1W (DC).
  • Maximum (worst-case) power consumption in deep-sleep mode: 3.8W(POE) or 3.6W (DC)

Part Code

JZ353A

JZ354A

JZ355A

JZ356A

JZ357A

JZ356ACM

JZ357ACM

JZ363A

JZ364A

JZ365A

JZ366A

JZ367A

Write a review

Aruba 550 Series Wireless Access Points

Aruba 550 Series Wireless Access Points

The Aruba 550 Series with 802.11ax (Wi-Fi 6), combined with Aruba intelligent software innovations are designed to deliver high performance connectivity for extreme high-density deployments of mobile and IoT.