Aruba 510 Series Wireless Access Points

Condition: New

The Aruba 510 series access points with 802.11ax (Wi-Fi 6), combined with Aruba intelligent software innovations, are designed to deliver high performance connectivity for mobile and IoT devices in any environment.The 510 series is designed to simultaneously serve multiple clients and traffic types in dense environments, and boosts overall network performance by up to 4X versus 802.11ac APs.In addition to 802.11ax benefits, the 510 Series also provide Aruba differentiated capabilities that include AI-powered RF optimization, always-on connectivity, WPA3 certified security, and unified wired and wireless policy with Dynamic Segmentation.Additionally, Green AP mode for 802.11ax APs also leverages AI/ML capabilities for energy savings of up to 70%.

3 Gbps of maximum throughput (HE80/HE40)
WPA3 and Enhanced open security
Built-In technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices
Orthogonal Frequency Division Multiple Access (OFDMA) and Multi-User Multiple-Input, Multiple-Output (MU-MIMO) for enhanced multi-user efficiency
IoT Ready Bluetooth 5 and Zigbee support

Hardware variants	AP-514: External antenna models AP-515: Internal antenna models
Mounting Details	A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the Aruba mount kits (sold separately); see the ordering Information section below for details.
Environmental Specifications	Operating conditions Temperature: 0°C to +50°C / +32°F to +122°F Humidity: 5% to 93% non-condensing AP is plenum rated for use in air-handling spaces ETS 300 019 class 3.2 environments Storage and transportation conditions Temperature: -40C to +70C / -40F to +158F Humidity: 5% to 93% non-condensing ETS 300 019 classes 1.2 and 2.3 environments
Mechanical Specifications	Dimensions/weight (AP-515; unit, excluding mount bracket): (H) 46mm x (W) 200mm x (D) 200mm (1.8" x 7.9" x 7.9") 810g (28.5oz) Dimensions/weight (AP-515; shipping): (H) 72mm x (W) 230mm x (D) 220mm (2.8" x 9.1" x 9.1") 1,010g (35.5oz)
Power Sources and Power Consumption	The AP supports direct DC power and Power over Ethernet (POE; on port E0) When both power sources are available, DC power takes priority over POE Power sources are sold separately; see the ordering Information section below for details When powered by DC or 802.3at POE, the AP will operate without restrictions When powered by DC, 802.3bt (class 5) POE or 2x 802.3at(class 4) POE, the AP will operate without restrictions. When powered by 802.3af POE and with the IPM feature enabled, the AP will start up in unrestricted mode, but it may apply restrictions depending on the PoE budget and actual power. What IPM restrictions to apply, and in what order, is programmable. Operating the AP with an 802.3af (class 3 or lower) PoE source and IPM disabled is not supported. Maximum (worst-case) power consumption: DC powered: 16W POE powered (802.3af, IPM enabled): 13.5W POE powered (802.3at/bt): 20.8W All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or 5.5W (DC powered). Maximum (worst-case) power consumption in idle mode: 12.6W (PoE) or 9.7W (DC). Maximum (worst-case) power consumption in deep-sleep mode: 5.9W (PoE) or 1.5W (DC).