StarTech ST122UTPA VGA Video Extender over Cat 5 with Audio

StarTech StarTech

New

The local unit features a single VGA input as well as two VGA outputs giving you the ability to view and split your source VGA signal to two independent displays locally.The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features two additional VGA outputs giving you the freedom to display your VGA source on up to four monitors in total.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The ST122UTPA VGA Video Extender over Cat 5 with Audio allows up to 4 (2 local and 2 remote) monitors to be connected to a single PC. The video signal and corresponding audio are sent to the remote unit over standard 4 pair Category 5 or better (Cat 5e recommended) UTP cable, supporting extended video distances of up to 150m / 500ft.

The VGA video and audio extender includes a local transmitter and a remote receiver, providing an out-of-the box solution that's perfect for point to point digital signage applications that require audio. To simplify installation, this kit also includes a mounting bracket for the ST122UTPA receiver to install onto walls, desks or cabinets for a tidy setup.

The StarTech.com Advantage

  • Cost-effective VGA extension through non-proprietary network cabling
  • Built-in mounting brackets, for a tidy and professional installation
  • Consists of 1 Base unit for the local display, and 1 Remote unit for the remote display (up to 2 monitors can be connected at each location)
  • Extends VGA and analog audio up to 500ft / 150m
  • Included mounting brackets
  • Pure hardware design, no software or drivers required
  • Uses standard Category 5 straight-wired, twisted-pair, network patch cable for economical and reliable data transmission
Warranty Information
Warranty 2 Years
Hardware
Ports 2
Cabling Cat 5e UTP or better
Daisy-Chain No
Connector(s)
Local Unit Connectors 1 - RJ-45 Female
1 - VGA (15 pin; High Density D-Sub) Male
2 - 3.5 mm Mini-Jack (3 Position) Female
2 - VGA (15 pin; High Density D-Sub) Female
Remote Unit Connectors 1 - RJ-45 Female
2 - 3.5 mm Mini-Jack (3 Position) Female
2 - VGA (15 pin; High Density D-Sub) Female
Performance
Maximum Cable Length 500 ft [152.4 m]
Max Distance 150 m / 500 ft
Supported Resolutions 1440x900 @ 150ft / 50m
1280x1024 @ 300ft / 100m
1024x768 @ 500ft / 150m
Physical Characteristics
Color Black
Enclosure Type Aluminum
Product Length 2.4 in [60 mm]
Product Width 3.3 in [83 mm]
Product Height 0.8 in [20 mm]
Product Weight 6.4 oz [181 g]
Power
Power Source AC Adapter Included
Output Voltage 9 DC
Output Current 0.6A
Center Tip Polarity Positive
  • 1 - Local VGA Extender Unit
  • 1 - Remote VGA Extender Unit
  • 1 - Mounting Bracket for Receiver (w/ screws)
  • 2 - Sets Rubber Feet
  • 2 - Power Adapter
  • 1 - Instruction Manual

Part Code:

ST122UTPA

Write a review

StarTech ST122UTPA VGA Video Extender over Cat 5 with Audio

StarTech ST122UTPA VGA Video Extender over Cat 5 with Audio

The local unit features a single VGA input as well as two VGA outputs giving you the ability to view and split your source VGA signal to two independent displays locally.The VGA video signal is then sent over standard 4 pair Category 5 or better UTP cable to the remote unit which also features two additional VGA outputs giving you the freedom to display your VGA source on up to four monitors in total.