NTI ST-IPUSBH-1G HDMI USB KVM Over IP Extender with Audio

NTI NTI

New

HDMI USB KVM Over IP Extender with Audio, RS232, and IR Extend HDMI monitor, Audio, USB keyboard, and USB mouse up to 330 feet using Gigabit Ethernet Also known as: HDMI USB KVM extender single CAT5, HDMI KVM over IP, remote digital HDMI monitor, HDMI transmitter/receiver, extend keyboard monitor mouse, high definition 1080p IR extender, HDTV video USB keyboard mouse balun

 


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The XTENDEX® HDMI USB KVM Over IP Extender with Audio, RS232, and IR provides remote KVM (USB keyboard, USB mouse, and HDMI monitor) access to a USB computer or HDMI source up to 330 feet over a Gigabit network using a single CAT5e/6 cable. Each ST-IPUSBH-1G consists of a local unit that connects to a computer or HDMI source, and a remote unit that connects to a monitor, mouse, keyboard, speaker, microphone, and other USB devices.

The local and remote units can be connected together for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.

The XTENDEX® HDMI USB KVM Over IP Extender with Audio, RS232, and IR provides remote KVM (USB keyboard, USB mouse, and HDMI monitor) access to a USB computer or HDMI source up to 330 feet over a Gigabit network using a single CAT5e/6 cable. Each ST-IPUSBH-1G consists of a local unit that connects to a computer or HDMI source, and a remote unit that connects to a monitor, mouse, keyboard, speaker, microphone, and other USB devices.

The local and remote units can be connected together for a Point-to-Point connection via CAT5e/6 cable or a Point-to-Many connection via a managed network switch.

  • Supports HDTV resolutions to 1080p.
    • Extend 1080p up to 330 feet in a Point-to-Point connection.
    • Extend 1080p up to 660 feet in a Point-to-Point or Point-to-Many connection via a managed network switch.
  • Supports USB 2.0 devices.
    • Keyboard and mouse are hot-pluggable.
    • Connect a mouse, keyboard, flashdrive, HDD or touchscreen display.
  • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
  • Built-in default EDID configuration table.
  • Support for multiple transmitters and receivers requires a managed network switch.
    • Distance between transmitter and receiver can be up to 660 feet when using a managed network switch (330 feet on each side).
    • Easily expandable – add receivers as you add control stations.
    • Identically configure dip switches on a transmitter and multiple receivers to link them together.
      • Simply press and hold the USB link button on a receiver for 3 seconds to gain USB control.
    • Cascade managed network switches to extend the distance between transmitter and receiver.
    • Up to 16 transmitters can be connected per individual network switch or between cascaded network switches.
  • When using multiple remote units, only one unit can have USB control over the source at any time.
    • Analog audio signals are transmitted via USB - a deactivated remote unit will continue to display video but does not provide analog sound or user control.
    • HDMI digital audio will still pass through as it is embedded in the video signal.
  • Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control system hardware such as Control4 or Crestron) to control devices attached to the matrix using RS232.
  • Inexpensive CAT5e/6 cable replaces bulk video cables.
  • HDCP compliant.
  • Supports the DDC2B protocol.
  • Compliant with the HDMI v1.2 standard.

Local Unit

  • One female HDMI connector.
  • One female USB Type B connector.
  • One female 3.5mm port for IR emitter.
  • One female DB9 connector for RS232.
  • One female 1 Gbps RJ45 port for sending/receiving high definition video/audio, USB and IR signals.
  • Four dip switches for linking transmitters and receivers in a Point-to-Many connection.

Remote Unit

  • One female HDMI connector.
  • Four female USB Type A connectors.
  • One female DB9 connector for RS232.
  • Two female 3.5mm stereo plugs for audio out and mic in.
  • Built-in IR receiver.
  • One female 1 Gbps RJ45 port for sending/receiving high definition video/audio, USB and IR signals.
  • Four dip switches for linking transmitters and receivers in a Point-to-Many connection.
  • Link button for disabling or gaining control of the source through USB.
  • Supports HDTV resolutions to 1080p.
  • Supports embedded digital audio through HDMI compatible TVs or audio receivers.

Power

  • Local and remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
  • Power consumption:
    • ST-IPUSBH-L-1G: 5W
    • ST-IPUSBH-R-1G: 12W

Cables

  • Use HD-xx-MM cable to connect an HDMI source or display (not included).
  • Use DVI-HD-xx-MM cable to connect a DVI source or display (not included).
  • Use USB Type A male to USB Type B male cable to connect a PC/notebook to the local unit (not included).
  • Use CAT5e/6 straight through cable with TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included)

Dimensions

  • WxDxH (in): 7.09x4.33x0.98 (180x110x25 mm).

Environmental

  • Operating temperature: 32 to 104°F (0 to 40°C).
  • Storage temperature: -4 to 140°F (-20 to 60°C).
  • Operating/storage relative humidity: 20 to 90% non-condensing RH.

Regular Approvals

  • CE, RoHS.
  • TAA compliant

Warranty

  • Two years

Part Code:

ST-IPUSBH-1G

Write a review

NTI ST-IPUSBH-1G HDMI USB KVM Over IP Extender with Audio

NTI ST-IPUSBH-1G HDMI USB KVM Over IP Extender with Audio

HDMI USB KVM Over IP Extender with Audio, RS232, and IR Extend HDMI monitor, Audio, USB keyboard, and USB mouse up to 330 feet using Gigabit Ethernet Also known as: HDMI USB KVM extender single CAT5, HDMI KVM over IP, remote digital HDMI monitor, HDMI transmitter/receiver, extend keyboard monitor mouse, high definition 1080p IR extender, HDTV video USB keyboard mouse balun