NTI ST-FOUSB2DARS-LC transparent USB Extender

NTI NTI

New

Transparent USB Extender with DVI Video, Audio and RS232 via Fiber Extend four USB devices, RS232, speakers and a digital DVI display up to 6,500 feet (2,000 meters) Also known as: Optical USB DVI Audio RS232 extender, remote keyboard mouse monitor printer usb device, dvi usb extension 6,500 feet long, dvi balun, DVI-D Optical Extension, DVI digital to singlemode fiber, fiber optic digital video extender


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

The XTENDEX® transparent USB Extender with DVI Video, Audio and RS232 via Fiber extends four USB devices, RS232, speakers and a single link digital DVI display up to 6,500 feet via two duplex singlemode LC fiber optic cables.

Each DVI USB KVM Extender consists of a local unit that connects to a computer and provides local keyboard, monitor and mouse connections, and a remote unit that connects to four USB devices, a DVI display, and analog stereo audio speakers

The XTENDEX® transparent USB Extender with DVI Video, Audio and RS232 via Fiber extends four USB devices, RS232, speakers and a single link digital DVI display up to 6,500 feet via two duplex singlemode LC fiber optic cables.

Each DVI USB KVM Extender consists of a local unit that connects to a computer and provides local keyboard, monitor and mouse connections, and a remote unit that connects to four USB devices, a DVI display, and analog stereo audio speakers.

  • Supports fully transparent USB connections - supports all USB computers (PC, SUN and MAC) and their associated peripherals.
  • Signal transmission via four-strand singlemode or multimode LC fiber optic cable.
    • Using singlemode cable, extend to 6,500 feet (1,981 meters). Using multimode cable, extend to 1,650 feet (503 meters
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
  • Two modes of USB operation.
  • Local mode - computer sees USB devices connected to the transmitter.
  • Remote mode - computer sees USB devices connected to the receiver.
  • Cables can be installed in conduit prior to extender installation.
  • Extend USB devices such as keyboards, mice, printers, game controllers, flash drives, touch screen monitors, whiteboards, etc.
  • Compliant with USB 2.0 (low/full/high speed) standards.
  • Low RFI/EMI for sensitive applications.
  • Optical link is not susceptible to eavesdropping or electromagnetic interference
  • Includes rack mounting kit.

Local Unit

  • Host Connection

    • Supports USB computers (PC, SUN and MAC) with single link digital DVI video.
    • Multiplatform support: Windows 2000/XP/Vista/7, Windows Server 2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
    • One female DVI-I, one female USB Type B, one 3.5 mm stereo audio jack, and one female DB9 connectors.
  • Local Access

    • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
    • One female DVI-I and two female USB Type A connectors.

Remote Unit

  • One female DVI-I, four female USB Type A, one 3.5 mm stereo audio jack, and one male DB9 connectors.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
  • Video signal: single link digital DVI.
  • Provides support for hi-speed (480 Mbps), full-speed (12 Mbps) or low-speed (1.5 Mbps) USB devices.
    • Compatible with USB touch screen monitors, including HP Compaq L2105tm.
  • Audio signal: analog stereo audio.
    • Audio sampling rate: 48 KHz
    • Input impedance: >25Kohm
    • Output impedance: 100ohm
    • Frequency response: 40 Hz to 15 KHz ±1dB
    • Signal-to-Noise Ratio (SNR): >79 dBA
    • Total Harmonic Distortion + Noise (THD+N): <0.05%
    • Stereo crosstalk: -67dB @ 1 KHz
  • Supports RS232 up to 250Kbps
  • Compliant with DDWG DVI standard.
  • Supports the DDC2B protocol.

Cables

  • Use a FIBER-2D-LCLC-50-xxM (2 duplex multimode LC 50-micron) multimode fiber optic cable to extend the receiver from the transmitter up to 1,650 feet (503 meters).
  • Use two duplex singlemode LC 9-micron fiber optic cable to extend the receiver from the transmitter up to 6,500 feet (1,981 meters).
  • Use SA-xx-MM male to male 3.5mm stereo audio cables to connect speakers.
  • Includes 6 ft (1.8 m) male to male DVI-I cable to connect a DVI source or display.
  • Includes 6 ft (1.8 m) male USB Type A to male USB Type B cable to connect source.
  • Includes 6 ft (1.8 m) male to male RS232 cable to connect a controller.

Power

  • Local and remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter (US AC adapter included).
  • Power consumption: 40W (each - transmitter and receiver).

Environmental

  • Operating temperature: 32 to 122°F (0 to 50°C)
  • Storage temperature: -14 to 185°F (-10 to 85°C)
  • Operating and Storage Relative Humidity: 5 to 85% non-condensing RH.

Dimensions WxDxH (in):

  • 12.6x5.1x1.75

Regulatory Approvals

  • CE, FCC, RoHS.
  • TAA compliant

Warranty

  • Two years

Part Code:

ST-FOUSB2DARS-LC 

Write a review

NTI ST-FOUSB2DARS-LC transparent USB Extender

NTI ST-FOUSB2DARS-LC transparent USB Extender

Transparent USB Extender with DVI Video, Audio and RS232 via Fiber Extend four USB devices, RS232, speakers and a digital DVI display up to 6,500 feet (2,000 meters) Also known as: Optical USB DVI Audio RS232 extender, remote keyboard mouse monitor printer usb device, dvi usb extension 6,500 feet long, dvi balun, DVI-D Optical Extension, DVI digital to singlemode fiber, fiber optic digital video extender