Gefen CAT5-1600A USB KVM Extender

1 Review(s)

Condition: New

Extends VGA, audio, and USB 2.0 up to 330 feet (100 meters) over two CAT-5 cables The Gefen CAT5-1600A extends VGA, Audio, and USB up to 330 feet (100 meters) using CAT-5 cables. Display resolutions up to 1920x1200 are supported. A local monitor can be connected to the Sender unit and up to two monitors can be connected to the Receiver unit.Four USB connectors on the Receiver unit allow control of the computer system from a KVM workstation. Mini-stereo connectors extend analog audio. A power-saving "Green Mode" can be set via DIP switches on the Sender and Receiver.

Extends VGA, audio, and USB 2.0 up to 330 feet (100 meters) over two CAT-5 cables The Gefen CAT5-1600A extends VGA, Audio, and USB up to 330 feet (100 meters) using CAT-5 cables. Display resolutions up to 1920x1200 are supported. A local monitor can be connected to the Sender unit and up to two monitors can be connected to the Receiver unit. Four USB connectors on the Receiver unit allow control of the computer system from a KVM workstation. Mini-stereo connectors extend analog audio. A power-saving "Green Mode" can be set via DIP switches on the Sender and Receiver. When activated, both units will go into low-power Standby Mode when the Sender's VGA input signal is not present.

How It Works

Place the Sender unit next to the VGA source. Use the included VGA cable to connect the source to the Sender unit. Optionally connect a local monitor to the Sender unit using another VGA cable. Connect up to two monitors to the Receiver unit with VGA cables. Connect the USB devices to the input and output connectors. For audio, connect a mini-stereo cable between the audio source and the audio input on the Sender unit. Connect a mini-stereo cable between the audio output on the Receiver unit and the audio device. Use two CAT-5 cables to connect the Sender unit to the Receiver unit.

To power-on the units, connect the locking power supplies and plug them into available electrical outlets. The computer can now be controlled from the KVM workstation.

Note: VGA and Audio can be extended to 1000 feet (300 meters). USB can be extended to 330 feet (100 meters).

Extends analog video (VGA) and analog audio up to 1000 ft. (300 meters) over two CAT-5 cables.
Extends USB 2.0 up to 330 feet (100 meters)
Supports resolutions up to 1920 x 1200
Supports USB 2.0 at up to 480 Mbps transfer rate
Reads EDID of both remote and local monitor
Backward-compatible with USB 1.1 devices
Green Mode saves power when VGA source is not present
Supports any Operating System (OS)
Color, brightness, and focus controls
Adjustable phase-shift knob for RGB colors
Locking power supplies
Rack-mountable

Video Amplifier Bandwidth: 350 MHz
Horizontal Frequency Range: 15 - 70 kHz
Vertical Frequency Range: 30 - 170 Hz
Video Input Connector (Sender): (1) VGA HD-15, male
Video Monitor Output Connector (Sender): (1) VGA HD-15, female
Video Output Connectors (Receiver): (2) VGA HD-15, female
Audio Input Connector (Sender): (1) 3.5 mm mini-stereo jack
Audio Output Connector (Receiver): (1) 3.5 mm mini-stereo jack
Link Connector (Sender / Receiver): (1) RJ-45,Shielded
USB Host Connector (Sender): (1) USB Type B, female
USB Device Connectors ( Receiver): (4) USB Type A, female
Power Supplies (Sender / Receiver): 5V DC, Locking
Power Consumption: 20W (max.) per unit
Operating Temperature: 0 - 40 °C
Dimensions (Sender / Receiver)(W x H x D): 17" x 1.7" x 5.3" (432mm x 43mm x 135mm)
Shipping Weight: 8 lbs. (3.6 kg)