Lantronix UD2100001-01 UDS2100

Remotely Monitor, Manage and Share Equipment Over the Net

The UDS family of device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet.

With the UDS2100, two pieces of equipment of virtually any type can be added to an Ethernet network in a matter of minutes! This dual-port device server is a quick, simple and inexpensive way to bring the advantages of remote management and control to equipment not currently connected to a network.

Extending Serial Communications Across the Globe

Our approach to network-enabling devices is transparent to your attached equipment and software so you won’t need to change the way you work. Using a method called serial tunneling, the UDS2100 encapsulates serial data into packets and transports it over Ethernet. Serial tunneling can be done in two ways:

• Using Lantronix supplied Com Port Redirector software, Windows® device applications not designed for network communications are re-directed to communicate to devices connected to the UDS2100.
• Connecting two UDS2100 device servers configured to automatically talk to each other over the network creates virtual serial connections that can extend serial communications across a facility or around the world.

The built-in web server enables users to access and configure the UDS2100 from a standard web browser. Using Lantronix development tools, users can build web pages to customize the UDS2100 for unique applications.

On-board Flash memory provides room for future system software upgrades and maintenance-free, nonvolatile web page storage.

Easy to Set Up and Use

The UDS2100 can be set up locally through its serial port, or remotely using Telnet or a web browser. The included DeviceInstaller Windows-based configuration software simplifies setup and provides an easy way to:

• Assign IP & other network specific addresses
• Load custom web pages
• Enable web-based configuration of the device server
• Ping or query the attached device(s) over the network
• View specific device data files
• Upgrade firmware

• Network virtually any device in minutes
• Access, monitor and control equipment over Ethernet
• Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
• Configure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utility
• Two DB9M DTE serial ports supporting RS232, RS422 and RS485
• Environmentally-friendly RoHS and WEEE compliant

Serial Interface

• Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
• Connectors: 2 DB9M DTE serial ports
• Data Rates: Software-selectable baud rate from 300 to 921 KBaud
• Characters: 7 or 8 data bits
• Parity: odd, even, none
• Stop Bits: 1 or 2 Control
• Signals: CTS/RTS (Hardware)
• Flow Control: XON/XOFF (Software)

Network Interface

• Interface: 10Base-T/100Base-TX Ethernet port
• Software selectable Ethernet speed 10/100/Auto
• Software selectable Half/Full/Auto duplex
• Connectors: RJ45
• Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, and RFC2217

Indicators (LED)

• Power (blue)
• RXI Serial (Activity) (green)
• TXI Serial (Activity) (yellow)
• RX2 Serial (Activity) (green)
• TX2 Serial (Activity) (yellow)
• RJ45 LEDs Link (100=green,10=yellow)
• Act (Full=green, Half duplex=green)

Processor

• CPU: Lantronix DSTNI-EX 48 MHz clock
• Memory: 256 KB zero wait state SRAM, 2 MB Flash

Management

• Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power

• 9-30 VDC on barrel connector (1.8 Watts maximum consumption)

Environmental

• Operating: 0° to 60° C (32° to 140°F)
• Storage: -40° to 85° C (-40 to 185°F)

Packaging

• Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available
• Dimensions (LxWxH): 9.5 x 7.2 x 2.3 cm (3.7 x 2.8 x 0.9 in)
• Weight: 0.4 kg (0.9 lbs)
• IP Rating: 30

Agency Approvals

• FCC, C/UL, CSA, VCCI, CE,TUV, CTick

Part Code:

UD2100001-01