Extreme Networks ISW-Series Industrial Ethernet Switch

Condition: New

Designed for industrial use, Extreme Industrial Switches provide continuous uptime, manageability and operational efficiency. With full PoE+ power per port, each switch offers the performance needed for todays power-hungry CCTV devices and WLAN access points.

4 10/100 POE+ ports, 2 10/100 ports, and 2 100FX/1000Base-X SFP ports
8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports
4 10/100/1000 POE+ ports, 2 10 10/100/1000 ports, and 2 100FX/1000Base-X SFP ports
8 10/100 POE+ ports, and 4 100FX/1000Base-X SFP ports
Full Wire Speed Layer 2 Switching
All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
Dual DC power input & Reverse power protection
-40°C to +75°C operating temperature
DIN Rail or Wall Mountable
Rugged IP30 Enclosure
Highly Resilient network redundant LACP, Spanning tree STP, RSTP & MSTP, and quick Ring fail-over protection
Port-based /tag-based VLAN, IEEE 802.1ad/QinQ VLAN, Add/remove VLAN tags
Multicasting support IGMP v1/v2, v3 proxy and snooping
Multicast/Broadcast/Flooding Storm Control
IEEE802.1x access control
Per VLAN mirroring
CLI/Web/SNMP management interfaces
PoE PSE power management and PD power consumption

OPERATING MODE	Store and forward, L2 wire-speed/non-blocking switching engine MAC Addresses- 8K Jumbo Frames- 9K Bytes
COPPER RJ45 PORTS	Speed- 10/100 Mbps or 10/100/1000 Mbps MDI/MDIX Auto-Crossover Auto-negotiation, full and half duplex Ethernet Isolation- 1500VRMS 1 minute All PoE ports IEEE 802.3af and 802.3at compliant and support up to 30W concurrently
PLUGGABLE SFP PORTS	100FX SFP and 100/1000BaseX Transceiver
NETWORK REDUNDANCY	Fast Failover Ring Protection with single and multiple rings, ring coupling, dual homing and chain IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
BRIDGING, VLANS, MULTICAST	Flow Control IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex) VLAN Capacity- 1024 Port-based VLANs; MAC-based VLANs; IP Subnet-based VLANs Protocol-based VLANs IEEE 802.1Q tag-based VLANs IEEE 802.1ad Double Tagging (Q in Q) IGMP v1, v2, v3 with up to 1000 multicast groups IGMP snooping and querying Immediate leave and leave proxy Throttling and filtering IEEE 802.1ab Link layer Discovery Protocol (LLDP)
TRAFFIC MANAGEMENT AND QOS	Priority- IEEE 802.1p QoS Queues per port- 8 Scheduling – Strict, Weighted Round Robin Port-based shaping
SECURITY	Port Security- IP and MAC-based access control, IEEE 802.1X authentication Network Access Control, RADIUS and TACACS+ AAA (Authentication, Accounting and Authorization) Storm Control- Multicast/Broadcast/Flooding Storm Control
MANAGEMENT	CLI GUI SNMP v1, v2c, v3 Telnet Management Security- HTTPs, SSH, RADIUS client for management FTP- Configuration Import/Export, Firmware Upgrade SYSLOG Per VLAN mirroring Ethernet Copper Diagnostics DDMI for SFP ports MIBs- RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB, RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB DHCP- Client, Server, Relay, Snooping, Option 82 NTP and SNTP PoE scheduling, power control, PoE PD power consumption
POWER	Redundant Input Terminals Input voltage range- 46-58VDC (50-58VDC for optimal 30W PoE performance) Reverse Power Protection Transient Protection- >15K Watts peak Power Consumption- 15 Watts without PD loading
LEDS	Power input status Ethernet link and speed status

Part Code:

ISW

Extreme Networks ISW-Series Industrial Ethernet Switch

Write a review

30 other products in the same category:

Products from the same manufacturer