Server Technology CS24VT-DFLA25E9/CL24VT-DFLA25E9* intelligent PDU

This Sentry PIPS CDU combines all of the features of a Smart CDU with the ability to provide power monitoring per inlet/infeed. Power information per infeed includes current, voltage, power, apparent power, crest factor, reactance, power factor and accumulated energy. This information replaces branch circuit monitoring devices typically installed in the power distribution panel or remote power panel (RPP) with higher accuracy and lower cost monitoring of each circuit attached to the CDU.
Combine the Sentry PIPS Smart Cabinet PDU with the Sentry Power Manager (SPM) software tool to gain power usage information across multiple Cabinet PDU's individual IP address. This Smart cabinet PDU delivers reliable power distribution, local power monitoring via LEDs, power monitoring via IP and environmental (temperature & humidity) monitoring via IP.  Increasing power demands and density in the equipment cabinet requires new functionality from your cabinet PDU.  The Sentry cabinet PDU product family uniquely meets these demands.
The Sentry Cabinet Power Distribution Unit (cabinet PDU) is an intelligent PDU with local LED input current monitoring, allowing network engineers to utilize the cabinet PDU's True RMS Power Monitor to precisely measure the current (in amps) that network devices are drawing on the power circuit. As new equipment units are added to the power drop, immediately observe its impact on the cumulative current draw. This allows the engineer to safely load each circuit to its maximum allowable load capacity without the danger of overloading the power circuit.
The CS24VT is ideal for powering blade server installations.  Eighteen IEC C19 outlets can power up to 6 chassis power supplies through the PDU with the only limitation being available kW's.  Six IEC C13 outlets are available to power network switches and related low amperage gear in the cabinet.

The cabinet PDU meets new UL 60950-1 Branch Circuit Protection requirements.

• High Density: Single-power input feed; 24 outlets per enclosure (Quantity 18 IEC 60320 C19 and 6 IEC 60320 C13 outlets)
• High Power Distribution: Three phase 208-240V power options; 50 and 60 Amp power input feed
• PIPS Input Power Monitoring: Precisely measure the aggregate current draw (in amps) on each input power phase. On-site veri¬cation of the input current with the LED digital display. Remote veri¬cation via web browser or serial screen.
• IP Access & Security: Web interface, SSL, SSH, Telnet, SNMP, FTP, SNTP, Syslog, LDAP, LDAPS, RADIUS, TACACS and RS-232 access
• SNMP Traps & Alerts: Provide automated SNMP-based alarms or Email alerts for power and environmental conditions
• Environmental Monitoring: Each Smart CDU supports two external temperature & humidity probes and reports conditions thru the user interface without the need for additional IP addresses
• Add an Expansion Module: Connect the Smart Expansion CDU (CL) to a Master unit (CS) for power monitoring of separate power circuits from a single IP address alarms or Email alerts for power and environmental conditions
• Environmental Monitoring: Each Smart CDU supports two external temperature & humidity probes and reports conditions thru the user interface without the need for additional IP addresses
• Add an Expansion Module: CDU (CL) to a Master unit (CS) for power monitoring of separate power circuits from a single IP address