We Have Global Presence
- Switch traffic between a Gigabit-speed fiber multimode backbone and two copper Gigabit segments.
- Or use the second copper port to provide access to other Ethernet devices.
- Supports distances up to 550 meters (1804.4 ft.) on 50-µ fiber or 220 meters (721.8 ft.) on 62.5-µ fiber.
- Features premium-grade components and special thermal design for temperature-uncontrolled use, especially outdoors.
- Robust metal case protects circuitry and communications from demands of industrial applications.
- No internal airflow required for cooling. Convection case works as a heat sink.
- Resists dirt, debris, smoke, insects, and moisture* (IEC529 IP40 rated).
- Designed for NEBS compliance to withstand shock, vibration, and high altitudes.
- Copper ports autonegotiate to network and device speeds.
- Autocross (MDI-X) on copper side. Cascade easily without the need for crossover cable.
- Provides full 10-, 100-, and 1000-Mbps swiching for high-performance LANs.
- Supports VLANs. Retrieves and transmits 802.1q tagged data packets unchanged.
- Use store-and-forward type switching to eliminate bad packet propagation and maximize bandwidth.
- Dynamically allocates buffer space, minimizing dropping of frames on congested ports.
- Collision-based flow control (half-duplex mode only) stops frames from entering when buffer queue space is low.
- Internal addresses are self-learning. Change port connections or domains without affecting operations.
- Operates transparent to software.
- Plug-and-play installation.
- Includes metal panel mounting clips.
- RoHS compliant.
- A combination harsh-environment switch and media converter.
- Enables you to convert copper to optical fiber.
- Includes two 10-/100-/1000-Mbps copper switch ports and one 1000-Mbps fiber multimode SC port.
- Converts 1000BASE-T to 1000BASE-SX multimode fiber.
- Withstands very extreme temperatures from -40 to +167º F (-40 to +75º C). Designed for use in outdoor environments.
| Environmental | Operating temperature: -40 to +167° F (-40 to +75° C); Humidity: 5 to 95% noncondensing |
| Fiber Optic Cable Required | 850-nm multimode |
| Standards | IEEE 802.3, IEEE 802.3u/ab, IEEE 802.1p, 1000BASE-TX, 1000BASE-SX, IEEE 802.1q VLANs |
| Switching Performance | Store-and-forward, nonblocking switching; 64 KB packet buffer memory with 1K address buffer storage and address buffer age-out time of 300 seconds |
| VLAN Support | Receives, transmits data packets with 4 bytes tagged VLAN field (IEEE 802.1q) unchanged |
| CE Approval | Yes |
| Connectors | Copper side: (2) RJ-45 (10BASE-T/100BASE-TX/1000BASE-T); Fiber side: (1) SC multimode (1000BASE-SX) |
| Indicators | (2) sets of LEDs (top-front and on end with ports): (1) Power, (2) GB (one for each RJ-45 port) indicating speed, (3) LK/ACT (for each port) indicating link/activity |
| Power | Premium-rated hardened 100-240-VAC, 47-63-Hz adapter and 12-VDC terminal block; Consumption: 4 W (typical), 5 W (maximum) |
| Size | 3.5"H x 3"W x 1"D (8.9 x 7.6 x 2.5 cm) |
| Weight | 0.3 lb. (0.1 kg) |
Part code:
LBH2001A-P-SC
30 other products in the same category:
Products from the same manufacturer
- APC
- Arista
- Aruba
- ATEN
- Austin Hughes
- Aviosys
- Avocor
- Bailey
- BenQ
- Black Box
- Brother
- Cadyce
- Cisco
- Cramer
- Crestron
- Cyber Power
- Dell
- Digi
- DTEN
- Eaton
- Enconnex
- EPSON
- Extreme Networks
- Gefen
- Geist
- Heckler Design
- HPE
- IBM
- IXIa
- iXsystems
- Juniper Mist
- Kaminario
- Kramer
- Lantronix
- Lenovo
- Linksys
- Logitech
- Luxor
- Mellanox Technologies
- Microsoft
- MINICOM
- Moxa
- MRV
- Napatech
- Neat
- NetApp
- NETGEAR
- Nimble
- NTI
- NVIDIA
- OpenGear
- Panasonic
- Perle
- PlenaForm Systems
- Pure Storage
- Qnap
- Quantum
- Raritan
- RF Code
- Samsung
- Seagate
- Sensaphone
- ServerLIFT
- ServerTech
- Silicom
- Solarflare
- Sony
- StarTech
- Sun Microsystems
- Supermicro
- TDK
- Thinklogical
- TRENDnet
- TURTLE
- Vertiv
- Wacom
- Yubico
- Zoom
- ZPE Systems