Black Box LBNC300A LinkGain Ethernet Extender over Coax

Condition: New

LinkGain Ethernet Extender over Coax

Enables you to repurpose RG-6 coax wiring already installed in a building.
Extends the life of your installed infrastructure.
Transparent to higher-layer protocols.
Equipped with Auto MDI/MDI-X port for easy cabling on the RJ-45 side.
Autonegotiates for network speed, transmits data in full-duplex mode.
Ten symmetrical vDSL speeds.
To configure for either local (CO) or remote (CPE) operation, just flip a DIP switch.
Can be mounted on a DIN rail or on a wall.
Or mount up to 16 extenders in the optional 2U-high, LinkGain Chassis (LB300A-RACK).

Extends 10-/100-Mbps Ethernet over existing coax cabling.
Use in pairs to extend point-to-point up to 1.6 miles (2.6 km) at 1 Mbps.
Or transmit at 75-Mbps through 85-Mbps speeds up to 656.1 feet (200 m).
Take advantage of existing coax to break the 327-foot (100-m) copper Ethernet barrier.

Standards —IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3x, Ethernet over vDSL
Distance (Maximum) —On Ethernet port side: 328 ft. (100 m);
On Ethernet (VDSL) extender port side: 1.6 mi. (2.6 km)
Temperature (Operating) —14 to 140° F (-10 to +60° C)
CE Approval —Yes
RoHS —Yes
Connectors —Ethernet port side: (1) RJ-45 (10BASE-T/100BASE-TX);
On Ethernet (VDSL) extender port side: (1) BNC coax (RG-6/AU)
Indicators —Unit LED: (1) Power Status (Power);
Port LED: (1) Link/Activity, (1) Fax (full-duplex);
Line LEDs: (1) Error, (1) Link, (1) Local, (1) Remote
Power —Input: 100-240 VAC, 50-60 Hz, autosensing;
Output: 12 VDC;
Consumption: 5.76 W maximum, 0.48 A at 12 VDC
Size —0.9"H x 3.2"W x 4.3"D (2.3 x 8.1 x 10.9 cm)
Weight —0.3 lb. (0.1 kg)