RF Code R170-0B06 PDU Sensor

RF Code RF Code

New

Designed for deployment with APC 8xxx series PDUs from Schneider Electric, R170 Sensors enable power monitoring data to flow over the RF Code radio frequency infrastructure.


Call For Price And Availability

India: +91 895 697 6186
USA: +1 510 651 2205
Singapore: +65 9152 4003

[email protected]

R170-0B06 PDU Sensors are designed fordeployment with Schneider Electric PDUs. This RF Code & Schneider Electric joint solution allows power monitoring data to flow over the RF Code radio frequency infrastructure, which in turn allows for the elimination of costly wired Ethernet connections to each PDU. These sensors are custom designed to integrate with the APC 8xxx series PDU’s by Schneider Electric. All power data collected from the PDU flows via the RF Code readers to the RF Code software Zone Manager, Asset Manager, CenterScape, and into other applications via new and existing integration modules for power monitoring and display.The R170 PDU Sensor has an integrated 7-foot cable with an RJ-12 connector that will plug into the PDU “serial” port to access the power monitoring data.

  • Significant cost savings, year after year, over a wired Ethernet PDU monitoring solution.
  • Eliminates all IP address configuration and maintenance for the PDUs.
  • When used with RF Code’s environmental monitoring solution,a homogenous view of data centeris
  • accomplished with RF Code’s Asset Manager or CenterScape software.
  • Simple & easy plug-and-play installation.
  • Data collection and reporting cycle every 10 minutes and every hour.
  • OPERATION

Operating Frequency-433.92 MHz
Group Code & Sensor ID Codes- > 540,000 unique IDs per Group Code
Typical Transmission Range- > 30 ft in the data center
Radiated Emissions- 71.8 dBuV/m at 3 meters (maximum)
Modulation-ASK
Stability-Saw stabilized
Sensor Cable Length (RJ45 from Sensor to Sensor Port)-7 ft (2.1 m)

  • ENCLOSURE

Case Length-1.35 in (34.28 mm)
Case Width-1.84 in (46.74 mm)
Case Height 0.50 in (12.7 mm)
Case Weight (with sensor)-0.66 oz (18.71 g)
Construction-Injection-molded polycarbonate enclosure
Durability-Tough, impact resistant and temperature stable
Mounting Options-Industrial-strength adhesive or screw-mountable snap-in bezel

  • ENVIRONMENTAL

Operating Temperature- -20° C to +70° C
Storage Temperature- -40° C to +80° C
Sealing- Splash resistant

  • POWER

Battery Type- Lithium CR2032 replaceable coin cell
Smart Sensor Feature- Low battery indication
Battery Life- > 5 years (typical)

Part Code:

R170-0B06

Write a review

RF Code R170-0B06 PDU Sensor

RF Code R170-0B06 PDU Sensor

Designed for deployment with APC 8xxx series PDUs from Schneider Electric, R170 Sensors enable power monitoring data to flow over the RF Code radio frequency infrastructure.