RF Code R130 Dry Contact Sensor

The R130 Dry Contact Sensor features two twisted wires that enable connection to a dry contact device. Once connected, the R130 will monitor and report the open and closed states of the device. While the connected device is in either an open or closed state the sensor will beacon the dry contact status once every 10 seconds. When the dry contact state changes the sensor will immediately broadcast three beacons at 0.5 seconds apart with the new dry contact status then return to beaconing once every 10 seconds. The R130 sensor can be mounted using either the industrial-strength adhesive backing or by using the supplied plastic screw mount. The R130 Dry Contact Sensor cases are impact-resistant and temperature stable. The R130 sensor battery life is typically 5-7 years with a 10-second beacon rate with no more than 250 switching cycles per day.

• Encoded Radio Transmissions at 433 MHz
• Monitor Dry Contact-Enabled Devices Using RFID Infrastructure
• Easy-to-Deploy, “Wire-free” Monitoring
• Immediate Notification of Dry Contact State Changes
• 10 Second Beacon Rate
• Low Power Consumption for Long Battery Life
• Superior Anti- Collision Technology for High Sensor Densities

• OPERATION

Operating Frequency- 433.92 MHz
Group Code & Sensor ID Codes- > 540,000 unique IDs per Group Code
Typical Transmission Range- > 200 ft (typical)
Radiated Emissions- 71.8 dBuV/m at 3 meters (maximum)
Modulation- ASK
Stability- Saw stabilized
Minimum Switching Time (Open)- 200ms minimum
Minimum Switching Time (Closed)- 200ms minimum
Maximum Switching Rate- 20 cycles per minute
Minimum Reporting Time- 3 seconds per cycle
Resistance (Open)- > 50M ohm
Resistance (Closed)- < 1M ohm

• ENCLOSURE

Case Length- 1.70 in (43.18 mm)
Case Width- 2.88 in (73.15 mm)
Case Height- 0.50 in (12.7 mm)
Case Weight (with sensor)- 0.66 oz (18.71 g)
Wire Length- 12 in (304.79 mm)
Construction- Injection-molded polycarbonate enclosure
Durability- Tough, impact resistant and temperature stable
Mounting Options Industrial-strength- adhesive or screw-mountable snap-in bezel

• ENVIRONMENTAL

Operating Temperature- -20° C to +70° C
Storage Temperature- -40° C to +80° C
Operating Humidity- < 95% RH non-condensing; not recommended for outdoor applications
Sealing- Splash resistant

• POWER

Battery Type- Lithium CR2032 replaceable coin cell
Smart Sensor Feature- Low battery indication
Battery Life- 5-7 years (typical)

Part Code:

R130