The R120 Door Sensor monitors and reports the door status of the racks in your data centers, enabling you to track enclosure access attempts using your active RFID asset inventorying infrastructure.
This product is no longer in stock
Availability date:
The 433 MHz R120 door sensor is a battery-powered RF transmitter that attaches to standard IT rack cabinet doors, or any door/frame that needs to be continuously monitored. Once installed on the door frame the R120 will monitor and report the door status, enabling you to track enclosure access attempts using your activeRFID asset inventorying infrastructure. The 433 MHz R120 sensor is a battery- powered RF transmitter that attaches to the door of a standard rack cabinet or other door frame. Every sensor broadcasts its unique ID and the door status message once every 10 seconds. Door status messages are received by RF Code readers.
Operating Frequency- 433.92 MHz
Group Code & Sensor ID Codes- > 540,000 unique IDs per Group Code
Typical Transmission Range- > 30 ft in the data center
Radiated Emissions- 71.8 dBuV/m at 3 meters (maximum)
Modulation- ASK
Stability- Saw stabilized ENCLOSURE
Case Length- 1.72 in (46.6 mm)
Case Width- 2.22 in (56.4 mm)
Case Height- 0.30 in (7.62 mm)
Case Weight (with sensor)- 0.40 oz (11.3 g)
Construction- Polycarbonate
Durability- Tough, impact resistant and temperature stable
Operating Temperature- -20° C to +70° C
Storage Temperature- -40° C to +80° C
Operating Humidity- < 95% RH non-condensing; not recommended for outdoor applications
Sealing- Splash resistant
Battery Type- Lithium CR2032 replaceable coin cell
Smart Sensor Features- Low battery indication
Battery Life- 5-7 years (typical)
Part Code:
R120